|
First we removed the old decking, which had been incorrectly fiberglassed by another company on 2 separate occasions.
After we removed the old decking we installed "sleepers" to give their new deck the correct pitch.
This picture was taken after the gelcoat was applied.
Finally, we installed the rails and cleaned up our mess!
|
 |
They also hired someone to install "stamped" Concrete which made the deck look like a brick patio.
After the sleepers were glued and nailed down, we installed 2 layers of fir plywood and then used 9" grinders to get
the seams level. The putty and fiberglass followed.
Yep, Another pic after the gelcoat was applied. We sanded the fiberglass surface to get the finish that you see
below... Click on the picture to get a better view!
|
